Artikel Konfigurator
0,00 EUR
Artikelbeschreibung
Manufactured plissees to your individual dimensions in 6 different groups of materials.
The material group A is a similar material as Creppe materials and has a light transparent of 3 - 30 %. The darker the plissee`s fabric, the smaller is the light transparent.
These substances are moisture-proof and washable by hand.
The material group B comprises "Crush Uni" and "Crepe pearl" substances with a with a thickness of 0,18mm - 0,25mm.
These are moisture-proof with a soft sponge washable.
The material is made from PE and the light transparency is 5 - 65 %.
In the material group C are the Taft Crush Pearl, Marquises design, Crepe desing and Jaquard qualities. The light transparency of these
materials is 5 - 45 % and is made of PE. Suitable for wetrooms are the following materials: Taft Crush Pearl and Jaquard Qualities. They are also washed out with a humid sponge.
In material group E are the dimming fabrics. They are completely opaque and have a thickness of 0,37mm - 0,4mm. Also these groups are moisture-proof and they are washable by a soft sponge. It is the most frequently chosen group of material on the roof windows.
The maximum width is 230cm and the maximum height is also 230cm.
Plissees are very often used in conservatories, bedroom or living room.
Particular favourites are plissees for roof windows.
Assembling in the window frame or as shown in the bay windows is possible.
Due to the technics, the product is very flexible and adaptable to any type of window.
There are 2 different types to operate
Typ 1
The upper rail is secured there.
The plisssees can be closed and opened from top to bottom.
Typ 2
This is the most flexible variant.
You can secure the plissee in every possible way.
You are also allowed to shade the lower third of the window.
colour of rails
The different colours of the substance
Crep substances of the price group A
Information about assembling and measurement
The measures must always be indicated from the inside view to the outside.
Please check the measures on several places and thereby you have to use the smallest measurement.
And here you can see the width and height which you have to order.
Assembling in front of the window niche
The desired supernatant will be added to the measure of the window niche
Pay attention to the protruding objects like window-sill or window handle
Assembling inside the window niche
1 cm air will be sucked off from the smallest measured width
The heigth of the niche is the measure which you have to order.
So that the plissee are not able to stripe somewhere, please pay attention to fittings like the window handle
Assembling in the glass fold
0,4 mm air will be sucked off from the smallest measured width.
The total measure from the top edge to the bottom edge of the glass strips is the height which you have to order.
The depths should be at least 1,5 cm.
Assembling on the window wing
This you can realize with holding clamps or wall holdersThe total measure from the top edge to the bottom edge of the glass strips plus the supernatant is the width which you have to order. The total measure from the top edge to the bottom edge of the glass strips plus the desired supernatant is the height which you have to order.
With holding clamps please measure from the top edge to the bottom edge of the glass wing
This Product was added to our catalogue on Wednesday, 15. December 2010.
